MRPs from the Zoloto price list dated 26 Sep 2026 · GST included · Call for today's price

API 594 dual plate check valves explained

Updated 13 Nov 2026 · Reviewed by MTC technical desk

The short answer

API 594 is an American Petroleum Institute standard for check valves, including wafer types. Zoloto's cast iron dual plate check valve 1082 and its ductile iron version 1082A name it, PN 16, for water, 40 to 350 mm and 40 to 600 mm. This guide shows what the datasheets print and how the two differ.

Want prices for these valves? Call 98490 02060 or build a quote list.

What the standard is (general description)

API 594 is an American Petroleum Institute standard for check valves, including wafer and lug types and dual plate designs. This is a general description: the standard itself sets the requirements and is not reproduced in Zoloto’s documents. Zoloto prints ‘Design standard API 594’ on the cast iron 1082 and ‘Design Reference Standard API 594’ on the ductile iron 1082A, with a wafer type design.

Which Zoloto products name it

Zoloto’s datasheets name it on 2 current products. The table reads each datasheet’s own line, so the wording is Zoloto’s:

Current Zoloto products that name this standard
Fig.Standard line as printedmmMarkShell testMax. temp.
1082Design standard API 594.40 to 350None24.50 kg/cm²g (350 psig)80°C
1082ADesign Reference Standard API 594.40 to 600None24 bar-18°C to 80°C

Current Zoloto products that name this standard. MRPs are per piece, as on 26 Sep 2026.

Current Zoloto products that name this standard
Fig.ProductSizes (mm)MRP per pieceHSN
1082Cast Iron Dual Plate Wafer Type Check Valve, PN 1640–300₹5,424 to ₹53,77184813000
1082ADuctile Iron Dual Plate Wafer Type Check Valve, PN 1640–600₹5,448 to ₹2,65,25884813000

The two valves

Zoloto dual plate check valves. MRPs are per piece, as on 26 Sep 2026.

Zoloto dual plate check valves
Fig.ProductSizes (mm)MRP per pieceHSN
1082Cast Iron Dual Plate Wafer Type Check Valve, PN 1640–300₹5,424 to ₹53,77184813000
1082ADuctile Iron Dual Plate Wafer Type Check Valve, PN 1640–600₹5,448 to ₹2,65,25884813000

See the 1082 and 1082A comparison, the 1083 and 1082 comparison and the dual plate check valve entry. At 100 mm, 1082 costs ₹9,737 as on 26 Sep 2026 and 1082A costs ₹9,784 as on 26 Sep 2026.

What the datasheets say

The lines below are quoted from the Zoloto catalogue for each product, so you can see in Zoloto’s own words what each one is for before you compare prices. Where the catalogue prints nothing, we say so and do not fill the gap.

Zoloto 1082: Cast Iron Dual Plate Wafer Type Check Valve, PN 16
Zoloto says it is suitable for Water. Features printed in the catalogue include: Design standard API 594.; Wafer Type Design, to take lesser space than the conventional Check Valve.; Being light in weight, is more rigid than the standard Swing Type Check Valve, which needs expensive foundation and special supports.; Being cylindrical body, stresses are uniformly distributed.; Much longer seat life because of Bronze / S.S to Rubber contact.; Less wear and tear of seat surfaces..
Zoloto 1082A: Ductile Iron Dual Plate Wafer Type Check Valve, PN 16
Zoloto says it is suitable for Water. Features printed in the catalogue include: Design Reference Standard API 594.; Wafer Type Design, to take lesser space than the conventional Check Valve.; Being light in weight, is more rigid than the standard Swing Type Check Valve, which needs expensive foundation and special supports.; Being cylindrical body, stresses are uniformly distributed.; Much longer seat life because of S.S to Rubber contact.; Less wear and tear of seat surfaces..

If a feature matters to your job, open the product page and read the full datasheet, including the materials table and the test pressures, and ask us to confirm it with Zoloto in writing.

Related Zoloto products. MRPs are per piece, as on 26 Sep 2026.

Related Zoloto products
Fig.ProductSizes (mm)MRP per pieceHSN
1083Cast Iron Non Return Valve PN 1.0 (Flanged)50–300₹5,665 to ₹62,63984813000
1083ACast Iron Non Return Valve PN 1.6 (Flanged)50–300₹6,744 to ₹65,93084813000
1010Bronze Horizontal Check Valve (Screwed)8–100₹1,083 to ₹31,53284813000

These neighbours in the Zoloto range are worth comparing when the standard on this page is not the only thing your specification names. Open each product page for its datasheet and check the standard line, the ratings and the marks. If your specification asks for a standard that none of Zoloto’s datasheets names, tell us: we will ask Zoloto whether a valve to it can be supplied, as its Special Note 6 says valves to a customer’s specification can be, and we will give you the answer in writing.

How to ask for compliance

A product that names a standard on its datasheet is shown by Zoloto as designed to it. Whether a particular batch has been tested or certified to it is a separate question. If your project needs proof, ask for the material or test certificate and drawings, which Zoloto’s Special Note 4 says can be provided with the goods, and for any licence or approval your specification requires, in writing, for the exact article and size. We will put the question to Zoloto and give you its answer with the date. We do not state anything the documents do not.

Ask us for today’s price, and see the extras page for add-ons. For the Zoloto valves at each rating see the pressure class pages.

Questions

What is API 594?

As a general description, an American Petroleum Institute standard for check valves: flanged, lug, wafer and butt-welding types. The standard holds its requirements.

Which Zoloto valves name it?

1082 as design standard and 1082A as design reference standard.

What is the difference between 1082 and 1082A?

1082 is cast iron (40 to 350 mm), 1082A is ductile iron (40 to 600 mm, -18°C to 80°C, shell test 24 bar).

Are they ISI marked?

No.

Are they PN 16?

Yes, both titles say PN 16.

Sources

  • Zoloto price list dated 26.09.2026 (pages 2 to 24)
  • Zoloto product catalogue, datasheets for the products named
  • General description of the standard (not from Zoloto documents); read the standard itself for its requirements

Zoloto products in this guide

Prices are Zoloto's Maximum Retail Prices (MRP) per piece, as printed in the Zoloto price list dated 26 September 2026. Zoloto states that GST at 18% is included in these MRPs. Prices, sizes and availability can change without notice. Call 98490 02060 or email info@maheshvalves.com for today's price and stock before ordering.

Need a price or a quote? Call 98490 02060 or email info@maheshvalves.com.

Need a price, a quote or stock today?

Call or email Mahesh Trading Corporation, official channel partner of Zoloto Industries. Send us your list of Fig. Nos., sizes and quantities.