MRPs from the Zoloto price list dated 26 Sep 2026 · GST included · Call for today's price

How an inverted bucket steam trap works, with a Zoloto 1090 parts table

Updated 13 Nov 2026 · Reviewed by MTC technical desk

The short answer

An inverted bucket steam trap has a bucket, open at the bottom, linked to a valve. Steam entering makes the bucket float and closes the valve; condensate fills the bucket and it sinks, opening the valve. Zoloto's materials table for the cast iron 1090 lists sixteen parts, including the bucket, bucket hook, valve lever and valve seat.

Want prices for these valves? Call 98490 02060 or build a quote list.

How it works (general)

The explanation below is general engineering knowledge, not Zoloto’s wording. Zoloto’s documents we hold give the construction of each valve (the parts table further down) but not a working principle, so we do not attribute this description to Zoloto.

An inverted bucket trap has an open-bottomed bucket inside the body, linked by a lever to a valve. When the trap holds only condensate, the bucket hangs down, the valve is open and condensate escapes. When steam enters, it collects under the bucket and makes it float; the rising bucket pulls the lever and shuts the valve. As the steam condenses or condensate re-enters, the bucket loses its buoyancy and drops, and the valve opens again. This is a general description.

Step by step

  1. Condensate arrives and the bucket hangs down with the valve open.
  2. Condensate discharges through the open valve.
  3. Steam arrives and bubbles up into the bucket.
  4. The bucket floats and closes the valve through the lever.
  5. The bucket fills as steam condenses and sinks, and the valve opens again.

What Zoloto’s datasheet shows for the 1090

The part names and materials below are Zoloto’s own materials-of-construction table for the 1090. The part numbers match the numbered balloons on the drawing on its product page, so you can match each part to the picture.

Materials of construction. Part numbers match the numbered balloons on the drawing.

Materials of construction. Part numbers match the numbered balloons on the drawing.
Part no.Name of partMaterialSpecificationQuantity
1PlugStainless SteelASTM A 276 Type 4101
2GasketSteam Jointing SheetIS 2712 Gr. W/31
3CoverCast IronIBR 86 To 93 Gr. A1
4Valve SeatStainless SteelASTM A 276 Type 3041
5GasketSteam Jointing SheetIS 2712 Gr. W/31
6ValveStainless SteelType 3041
7Valve LeverStainless SteelType 3041
8Valve HookStainless SteelType 3041
9Bucket HookStainless SteelType 3041
10BucketStainless SteelNon-Rustable1
11BodyCast IronIBR 86 To 93 Gr. A1
12Bucket RingCast IronIBR 86 To 93 Gr. A1
13Valve Hook PlateStainless SteelType 3041
14Circlip LockSpring SteelNon-Rustable1
15NutsCarbon Steel–As Reqd.
16BoltsCarbon Steel–As Reqd.

Zoloto valves described in this guide. MRPs are per piece, as on 26 Sep 2026.

Zoloto valves described in this guide
Fig.ProductSizes (mm)MRP per pieceHSN
1090Cast Iron Bucket Type Steam Trap (Screwed)15–50₹3,869 to ₹18,68384818030
1086Stainless Steel Thermodynamic Steam Trap (Screwed)15–25₹2,394 to ₹2,77484818030

Limits and cautions

A bucket trap needs the body filled with water to work, so it is sensitive to starting conditions in some designs. Zoloto’s documents we hold give no capacity table, so they do not tell you which size to use. The datasheet’s working pressure for the trap is 10.55 kg/cm²g, lower than its shell test, and its temperature is 220°C.

Zoloto valves usually priced with a steam trap. MRPs are per piece, as on 26 Sep 2026.

Zoloto valves usually priced with a steam trap
Fig.ProductSizes (mm)MRP per pieceHSN
1041Bronze Globe Steam Stop Valve (Screwed)15–50₹4,684 to ₹22,90284818030
1053Bronze Y-Type Strainer (Screwed)15–50₹1,541 to ₹18,99584818030
1013Bronze Horizontal Check Valve No.9 (Screwed)8–100₹1,610 to ₹56,32484813000

Open each product page for its datasheet, materials table and drawing, and ask us if your system needs a figure that the documents do not print. We will put the question to Zoloto and give you the answer in writing. Zoloto’s Special Note 3 offers a Form III C test certificate for I.B.R valves, which includes both of its steam traps.

Where to go next

See how a thermodynamic trap works, the bucket steam trap entry and the steam trap price list. At 25 mm the 1090 costs ₹8,648 as on 26 Sep 2026.

What the datasheets say

The lines below are quoted from the Zoloto catalogue for each product, so you can see in Zoloto’s own words what each one is for before you compare prices. Where the catalogue prints nothing, we say so and do not fill the gap.

Zoloto 1090: Cast Iron Bucket Type Steam Trap (Screwed)
Zoloto says it is suitable for Steam. Features printed in the catalogue include: Screwed Female Ends to BSP.; Inverted Bucket Type, Bolted Cover.; With Stainless Steel (S.S 304) renewable working parts..
Zoloto 1086: Stainless Steel Thermodynamic Steam Trap (Screwed)
Zoloto says it is suitable for Steam. Features printed in the catalogue include: Screwed Female Ends to BSPT.; Superior Quality Investment Casting.; Provided with integral strainer.; Stainless Steel (S.S 304) 0.5 mm hole diameter perforated sheet screen for trouble free service.; Mirror finished moving disc..

If a feature matters to your job, open the product page and read the full datasheet, including the materials table and the test pressures, and ask us to confirm it with Zoloto in writing.

Ask us for today’s price, and see the extras page for add-ons. For the Zoloto valves at each rating see the pressure class pages.

Questions

How does an inverted bucket trap work?

As general engineering knowledge, steam entering the bucket makes it buoyant, so it rises and closes the valve. When the steam condenses or condensate enters, the bucket loses buoyancy, sinks and opens the valve to discharge.

What parts are in Zoloto's 1090?

Plug, gaskets, cover, valve seat, valve, valve lever, valve hook, bucket hook, bucket and body among sixteen parts.

What are its ratings?

Shell 21.10 kg/cm²g (300 psig), maximum working pressure 10.55 kg/cm²g (150 psig), 220°C, I.B.R marked.

Are the working parts replaceable?

Zoloto's datasheet says the working parts are renewable stainless steel S.S 304.

What are its ends?

Screwed female ends to BSP, 15 to 50 mm.

Sources

  • Zoloto price list dated 26.09.2026 (pages 2 to 24)
  • Zoloto product catalogue, datasheets for the products named
  • General engineering description of the working principle (not from Zoloto documents)

Zoloto products in this guide

Prices are Zoloto's Maximum Retail Prices (MRP) per piece, as printed in the Zoloto price list dated 26 September 2026. Zoloto states that GST at 18% is included in these MRPs. Prices, sizes and availability can change without notice. Call 98490 02060 or email info@maheshvalves.com for today's price and stock before ordering.

Need a price or a quote? Call 98490 02060 or email info@maheshvalves.com.

Need a price, a quote or stock today?

Call or email Mahesh Trading Corporation, official channel partner of Zoloto Industries. Send us your list of Fig. Nos., sizes and quantities.