Installing a pressure reducing valve with gauges: a general guide with Zoloto 1040A and 1040B
Updated 13 Nov 2026 · Reviewed by MTC technical desk
The short answer
A general guide to installing a pressure reducing valve: isolating valves on both sides, a strainer ahead of it, a gauge on the outlet, and a line that suits the flow direction. Zoloto's 1040A and 1040B print a provision for a 1/4 inch BSP outlet gauge and a note on the lowest outlet pressure at 25 bar inlet.
Want prices for these valves? Call 98490 02060 or build a quote list.
A general layout (not Zoloto’s drawing)
The list below is general installation practice, not an instruction from Zoloto. Zoloto’s documents we hold give no installation drawing for its PRVs. Follow the drawing of your designer and any instruction supplied with the valve.
- Isolating valve upstream and downstream, so the PRV can be taken out of service. Zoloto’s ball valves such as 1008B are a common choice for small bore.
- A strainer ahead of the PRV, so that grit does not reach the seat. Zoloto’s screwed Y strainers include 1053A.
- The PRV itself, in the flow direction the valve marks, and in the position the manufacturer allows.
- A gauge on the outlet. Zoloto’s 1040A and 1040B have a provision for a 1/4 inch BSP gauge on the outlet to monitor the pressure.
- A safety or relief device downstream, if your designer wants one: see Zoloto’s safety relief valves.
- A bypass with its own valve, if the line cannot be shut while the PRV is serviced.
A PRV and the Zoloto valves usually priced with it. MRPs are per piece, as on 26 Sep 2026.
| Fig. | Product | Sizes (mm) | MRP per piece | HSN |
|---|---|---|---|---|
| 1040B | Forged Brass Compact Pressure Reducing Valve (Screwed) | 15–50 | ₹3,087 to ₹12,392 | 84811000 |
| 1040A | Bronze Compact Pressure Reducing Valve (Screwed) | 65–100 | ₹30,957 to ₹95,570 | 84811000 |
| 1008B | Forged Brass Ball Valve (Screwed) | 8–100 | ₹674 to ₹29,904 | 84818090 |
| 1053A | Forged Brass Y-Type Strainer (Screwed) PN 25 | 15–50 | ₹1,050 to ₹9,151 | 84818090 |
What the datasheet tells you
The PRV datasheets print a maximum upstream pressure of 25 bar, a shell test of 35 bar and 90°C, and the note that at 25 bar inlet the minimum outlet pressure will be 5.5 bar. That note means the valve cannot reduce the pressure all the way down at the highest inlet pressure, so a very low outlet pressure from a high inlet may need two stages. Ask us to check your numbers against the datasheet. The PRV explainer covers what the valve does.
Commissioning and checks (general)
After fitting, flush the line, open the isolating valves slowly, set the outlet pressure with the adjuster according to the manufacturer’s instruction while a gauge reads the outlet, and then check that the outlet pressure holds when the flow changes. Record the setting. Zoloto’s documents do not give a commissioning procedure, so ask the supplier of the system to confirm yours.
Ask us for today’s price, and see the extras page for add-ons. For the Zoloto valves at each rating see the pressure class pages.
What the datasheets say
The lines below are quoted from the Zoloto catalogue for each product, so you can see in Zoloto’s own words what each one is for before you compare prices. Where the catalogue prints nothing, we say so and do not fill the gap.
- Zoloto 1040B: Forged Brass Compact Pressure Reducing Valve (Screwed)
- Zoloto says it is suitable for Water. Features printed in the catalogue include: Screwed Female Ends to IS 554/BS 21/ISO 7.; Most ideal for sensitive & a consistent fluid regulation.; Rugged body, compact sized, easy to install, rarely requires maintenance & virtually noiseless.; Trim components have a distinct edge of being Hot Brass Forged.; Provision provided to install a pressure gauge of 1/4” B.S.P size to measure/monitor the critically relevant Outlet Pressure.; Designed to suit every application requiring accurate pressure ratings.; No external source of energy required.; All ‘O’ rings are of superior food grade rubber, hence ensuring absolute zero health hazard..
- Zoloto 1040A: Bronze Compact Pressure Reducing Valve (Screwed)
- Zoloto says it is suitable for Water. Features printed in the catalogue include: Screwed Female Ends to IS 554/BS 21/ISO 7.; Most ideal for sensitive & a consistent fluid regulation.; Rugged body, compact sized, easy to install, rarely requires maintenance & virtually noiseless.; Trim components have a distinct edge of being Hot Brass Forged.; Provision provided to install a pressure gauge of 1/4” B.S.P size to measure/monitor the critically relevant Outlet Pressure.; Designed to suit every application requiring accurate pressure ratings.; No external source of energy required.; All ‘O’ rings are of superior food grade rubber, hence ensuring absolute zero health hazard..
If a feature matters to your job, open the product page and read the full datasheet, including the materials table and the test pressures, and ask us to confirm it with Zoloto in writing.
What to send us
Send the Fig. No. or the description of the valve you are looking at, the size, the pressure and temperature of the line, the quantity and the town it is going to. We will check them against the datasheets, tell you what is printed and what is not, and ask Zoloto where the documents are silent. We show Zoloto’s figures as printed and will not fill a gap with a guess.
Related guides
Questions
Do I need a gauge?
It is common practice to fit one on the outlet so that the set pressure can be checked. Zoloto's datasheets say a provision for a 1/4 inch BSP gauge is provided to monitor the outlet pressure.
Do I need isolating valves?
It is common to fit one on each side so that the PRV can be serviced, often with a bypass. This is general practice, so follow your designer.
Do I need a strainer?
A strainer ahead of a PRV protects it from dirt. Zoloto lists screwed strainers such as 1053A, but its documents do not require one for its PRV.
How do I set it?
Zoloto's documents we hold give no setting procedure. Ask us for the datasheet and the manufacturer's instruction, and follow it.
Does Zoloto give a minimum outlet pressure?
A note says that at the maximum inlet pressure of 25 bar, the minimum outlet pressure will be 5.5 bar.
Sources
- Zoloto price list dated 26.09.2026 (pages 2 to 24)
- Zoloto product catalogue, datasheets for the products named
- General engineering guidance (not from Zoloto documents) for the method
Zoloto products in this guide

Bronze Compact Pressure Reducing Valve (Screwed)
65–100 mm · 3 sizes
₹30,957 to ₹95,570 as on 26 Sep 2026

Forged Brass Compact Pressure Reducing Valve (Screwed)
15–50 mm · 6 sizes
₹3,087 to ₹12,392 as on 26 Sep 2026

Forged Brass Ball Valve (Screwed)
8–100 mm · 11 sizes
₹674 to ₹29,904 as on 26 Sep 2026

Forged Brass Y-Type Strainer (Screwed) PN 25
15–50 mm · 6 sizes
₹1,050 to ₹9,151 as on 26 Sep 2026
Prices are Zoloto's Maximum Retail Prices (MRP) per piece, as printed in the Zoloto price list dated 26 September 2026. Zoloto states that GST at 18% is included in these MRPs. Prices, sizes and availability can change without notice. Call 98490 02060 or email info@maheshvalves.com for today's price and stock before ordering.
Need a price or a quote? Call 98490 02060 or email info@maheshvalves.com.