MRPs from the Zoloto price list dated 26 Sep 2026 · GST included · Call for today's price

Pipe size to valve size: inch, mm and DN on Zoloto valves

Updated 13 Nov 2026 · Reviewed by MTC technical desk

The short answer

Valves are sized by the nominal size of the pipe they fit, in inches or millimetres (DN). Zoloto prints both for every size, and the pair is not always an exact conversion: 1 1/2 inch is exactly 38.1 mm but Zoloto prints 40 mm.

Want prices for these valves? Call 98490 02060 or build a quote list.

How to read this guide

Valve size is a nominal size: the label of the pipe the valve fits. This is general engineering knowledge. The pairs below are read from Zoloto’s price list.

Every size pair on Zoloto’s price list

Every distinct inch and millimetre size pair printed on the Zoloto price list, with the exact conversion of the inch size
mm (DN)Inch as printedExact mm of that inch sizeEqual to exact?
81/46.3No, nominal pair
103/89.5Yes
151/212.7No, nominal pair
203/419.0No, nominal pair
25125.4Yes
321 1/431.8Yes
401 1/238.1No, nominal pair
50250.8No, nominal pair
652 1/263.5No, nominal pair
80376.2No, nominal pair
1004101.6No, nominal pair
1255127.0No, nominal pair
1506152.4No, nominal pair
2008203.2No, nominal pair
25010254.0No, nominal pair
30012304.8No, nominal pair
35014355.6No, nominal pair
40016406.4No, nominal pair
45018457.2No, nominal pair
50020508.0No, nominal pair
60024609.6No, nominal pair

“No, nominal pair” marks sizes where the printed millimetre size differs from the exact conversion of the inch size, which is true for most sizes because DN is a nominal label: for example 1 1/2 inch is 38.1 mm exact but 40 mm printed. Always use the printed pair. The inch, mm and DN tool shows both.

Using the table

  1. Find your pipe’s size in inches or millimetres in the table.
  2. Read the other unit from the same row.
  3. Give us both when you order.
  4. For flanged valves, also give the flange standard, because the size is a nominal label and the flange decides the bolt pattern.

The cast iron sluice valve 1079A starts at 50 mm and goes to 600 mm, with no 500 mm size; the bronze gate valve 1035 runs from 8 to 100 mm; the forged brass ball valve 1008B from 8 to 100 mm.

Putting it together

At 50 mm (2 inch), the gate valve 1035 costs ₹11,234 as on 26 Sep 2026. Send us the medium, pressure, temperature, pipe size and the ends you need, and we will name the Zoloto articles whose datasheets match and say where the documents are silent. The final choice for a real system is your designer’s.

What the datasheets say

The lines below are quoted from the Zoloto catalogue for each product, so you can see in Zoloto’s own words what each one is for before you compare prices. Where the catalogue prints nothing, we say so and do not fill the gap.

Zoloto 1035: Bronze Gate Valve (Screwed)
Zoloto says it is suitable for Water, Oil. Features printed in the catalogue include: Screwed Female Ends to IS 554 / BS 21 / ISO 7.; Screwed in Bonnet, Inside Screw, Non-Rising Stem, Integral Seat, Solid Wedge.; Designed sheet metal handwheel for a firm grip and convenient operation..
Zoloto 1079A: Cast Iron Sluice Valve PN 1.0 (Flanged)
Zoloto says it is suitable for Water. Features printed in the catalogue include: Design Standard IS 14846 PN 1.0.; Bolted Bonnet, Inside Screw, Non-Rising Stem.; Rigid and Sturdy design..
Zoloto 1008B: Forged Brass Ball Valve (Screwed)
Zoloto says it is suitable for Water, Oil, Air*. Features printed in the catalogue include: Screwed Female Ends to IS 554 / BS 21 / ISO 7.; Full Bore, Two Piece Design.; Quarter Turn, Lever Operated..

If a feature matters to your job, open the product page and read the full datasheet, including the materials table and the test pressures, and ask us to confirm it with Zoloto in writing.

Ask us for today’s price, and see the extras page for add-ons. For the Zoloto valves at each rating see the pressure class pages.

Questions to settle before you order

  • Sizes and standards. Write the pipe size and the flange standard or thread for every position, because Zoloto generally supplies flanged valves undrilled and screwed valves to IS 554 / BS 21 / ISO 7 unless you say otherwise.
  • Ratings. Write the highest pressure and the temperature each position will see, and compare them with the printed test pressures and maximum temperature on the datasheet.
  • Marks and certificates. If your specification needs the ISI or I.B.R mark, a material or test certificate or drawings, say so on the order: Zoloto’s Special Notes 3 and 4 say certificates and drawings can be provided with the goods.
  • Price and delivery. The prices on this site are MRPs from the list dated 26.09.2026. Ask us for today’s price, the GST treatment and the delivery for your order, in writing.

If your drawing gives only a nominal size in inches, such as 2 inch, ask the designer for the millimetre size as well, so that the order is unambiguous. If it gives only DN, the matching inch size is in the table.

Questions

What does DN mean?

DN is the nominal diameter in millimetres, a size label. See the DN glossary entry.

Is 1 inch exactly 25 mm?

1 inch is exactly 25.4 mm. Zoloto prints 25 mm for 1 inch, which is the usual trade size.

Why does Zoloto print 40 mm for 1 1/2 inch?

It is the standard trade pairing. 1 1/2 inch is exactly 38.1 mm, but the nominal metric size is 40.

Which do I use?

Use the pair printed on the row you are buying, and tell us both if you can.

Does the valve size equal the pipe's outside diameter?

No. It is a nominal size. Zoloto's documents do not give pipe outside diameters.

Sources

  • Zoloto price list dated 26.09.2026 (pages 2 to 24)
  • Zoloto product catalogue, datasheets for the products named
  • General engineering guidance (not from Zoloto documents) for the selection steps

Zoloto products in this guide

Prices are Zoloto's Maximum Retail Prices (MRP) per piece, as printed in the Zoloto price list dated 26 September 2026. Zoloto states that GST at 18% is included in these MRPs. Prices, sizes and availability can change without notice. Call 98490 02060 or email info@maheshvalves.com for today's price and stock before ordering.

Need a price or a quote? Call 98490 02060 or email info@maheshvalves.com.

Need a price, a quote or stock today?

Call or email Mahesh Trading Corporation, official channel partner of Zoloto Industries. Send us your list of Fig. Nos., sizes and quantities.