Test pressures on Zoloto datasheets: kg/cm²g, psig, MPa and bar
Updated 13 Nov 2026 · Reviewed by MTC technical desk
The short answer
Zoloto's datasheets print test pressures in kg/cm²g with psig, in MPa, or in bar. One kg/cm² is 0.980665 bar and 14.2233 psi, and 1 MPa is 10 bar. This guide gives the conversions, shows which Zoloto products use which unit, and lists the cases where Zoloto's printed psig differs slightly from an exact conversion.
Want prices for these valves? Call 98490 02060 or build a quote list.
The exact conversions
These are definitions, not Zoloto’s. Gauge pressure (the “g”) is measured above atmospheric pressure.
| 1 unit of | bar | MPa | kg/cm² | psi |
|---|---|---|---|---|
| bar | 1 | 0.1 | 1.0197 | 14.5038 |
| MPa | 10 | 1 | 10.197 | 145.0 |
| kg/cm² | 0.980665 | 0.09807 | 1 | 14.2233 |
The pressure unit converter does the same for any value.
Which unit Zoloto uses where
Of the current Zoloto products with a printed test pressure, these units appear:
| Unit | Products |
|---|---|
| kg/cm²g with psig | 57 |
| MPa | 31 |
| bar | 14 |
The bronze valves such as 1008 and 1001 print kg/cm²g with psig, the cast iron valves such as 1079B print MPa, and the forged steel valves such as 1074 print bar. Some products mix units, such as the steam trap 1086 (bar) and its sibling 1090 (kg/cm²g): see the steam trap comparison.
Zoloto’s printed psig compared with the exact conversion
Zoloto prints a psig figure beside many kg/cm²g values. Some are rounded. The table compares every distinct pair on the current datasheets with the exact conversion:
| kg/cm²g printed | psig printed | psi exact | First product |
|---|---|---|---|
| 7 | 100 | 99.6 | 1081A |
| 10 | 150 | 142.2 | 1084 |
| 10.55 | 150 | 150.1 | 1094A |
| 13 | 185 | 184.9 | 1068 |
| 13.5 | 192 | 192.0 | 1085B |
| 13.5 | 192 | 192.0 | 1018 |
| 14 | 200 | 199.1 | 1093A |
| 15 | 220 | 213.3 | 1084 |
| 16 | 225 | 227.6 | 1085 |
| 16 | 230 | 227.6 | 1082 |
| 17.58 | 250 | 250.0 | 1064 |
| 20 | 285 | 284.5 | 1018 |
| 20 | 300 | 284.5 | 1085B |
| 21 | 313 | 298.7 | 1077 |
| 21 | 300 | 298.7 | 1093A |
| 21 | 30 | 298.7 | 1089 |
| 21.1 | 300 | 300.1 | 1094A |
| 24 | 340 | 341.4 | 1087A |
| 24.5 | 350 | 348.5 | 1092 |
| 24.6 | 350 | 349.9 | 1073 |
| 25 | 350 | 355.6 | 1085 |
| 26 | 370 | 369.8 | 1068 |
| 31 | 425 | 440.9 | 1077 |
| 31 | 440 | 440.9 | 1089 |
| 35 | 500 | 497.8 | 1053A |
| 35.15 | 500 | 499.9 | 1064 |
| 48 | 700 | 682.7 | 1092 |
| 49 | 700 | 696.9 | 1073 |
The differences are small and we keep the printed values on every product page, with an information note where the two differ. Use the exact figure for calculations.
Ask us for today’s price, and see the extras page for add-ons. For the Zoloto valves at each rating see the pressure class pages.
Every shell test in one unit
To compare products printed in different units, convert them to bar. The table does that for a cross-section of the Zoloto range, using the exact factors above, and leaves the printed text beside it:
| Fig. | Printed shell test | In bar |
|---|---|---|
| 1008 | 25 kg/cm²g (350 psig) | 24.5 |
| 1001 | 20 kg/cm²g (285 psig) | 19.6 |
| 1079A | 1.5 MPa | 15.0 |
| 1079B | 2.4 MPa | 24.0 |
| 1078G | 3.75 MPa | 37.5 |
| 1074 | 207 bar (3000 psig) | 207.0 |
| 1071 | 60 bar (870 psig) | 60.0 |
| 1084 | 15 kg/cm²g (220 psig) | 14.7 |
| 1084A | 24 kg/cm²g (340 psig) | 23.5 |
| 1087 | Test Pressure (Hydrostatic) – Shell : 24 bar (350 psig) | 24.0 |
| 1082 | 24.50 kg/cm²g (350 psig) | 24.0 |
| 1082A | 24 bar | 24.0 |
| 1086 | 51 bar (740 psig) | 51.0 |
| 1090 | 21.10 kg/cm²g (300 psig) | 20.7 |
| 1053A | 35 kg/cm²g (500 psig) | 34.3 |
A shell test is the pressure at which the valve body is tested for strength and leaks. It is higher than the working pressure: it is not the pressure to run the valve at. The seat test, where printed, checks the seal across the closed valve and is lower. Neither is a rating: for the rating see PN rating explained.
Common mistakes
- Mixing kg/cm² and bar. A kg/cm² is about 2% smaller than a bar, so the error is small but real when you compare ratings.
- Treating the shell test as the working pressure. Zoloto’s datasheets print working pressures separately, where they print them at all.
- Forgetting the “g”. Gauge pressure is above atmospheric. Absolute pressure is about 1 bar higher.
- Reading psig as exact. Zoloto’s psig figures are rounded, as the table above shows.
What to give us when you ask
When you write to us about a pressure, quote the Fig. No., the printed value and its unit exactly as shown on the product page, and say whether you need the working pressure or the test pressure. We will answer from the datasheet and ask Zoloto where it is silent.
Working in a spreadsheet
To convert in a spreadsheet, keep one column for the printed value, one for its unit, and one for the value in bar. Use 0.980665 for kg/cm² and 10 for MPa, and leave bar as it is. Keep the printed value beside the converted one so that you can always see what the datasheet said. For a quick check use our pressure unit converter, which also shows psi. If you need the table of Zoloto shell tests for a whole family, send us the family and we will convert it from the datasheets.
A worked example
The bronze ball valve 1008 prints a shell test of 25 kg/cm²g (350 psig). In bar that is 25 times 0.980665, or 24.5 bar. In MPa it is 2.45. In psi it is 25 times 14.2233, or about 355.6, so Zoloto’s 350 is a rounded figure. The cast iron sluice valve 1079B prints 2.4 MPa, which is exactly 24 bar, and about 24.5 kg/cm². So the two valves have nearly the same shell test, even though they are printed in different units, which is the reason to convert before comparing.
Related guides
Questions
How do I convert kg/cm² to bar?
Multiply by 0.980665. So 25 kg/cm²g is about 24.5 bar.
How do I convert MPa to bar?
Multiply by 10. So 1.6 MPa is 16 bar.
How do I convert kg/cm² to psi?
Multiply by 14.2233. So 25 kg/cm²g is about 355.6 psi. Zoloto prints 350 psig beside it.
Does the 'g' mean anything?
It means gauge pressure, measured above atmospheric pressure.
Does Zoloto's rounding matter?
Zoloto keeps its printed figures, and so do we. For engineering calculations use the exact conversion and check with the designer.
Sources
- Zoloto price list dated 26.09.2026 (pages 2 to 24)
- Zoloto product catalogue, datasheets for the products named
- Unit definitions: 1 kg/cm² = 0.980665 bar; 1 MPa = 10 bar; 1 bar = 14.5038 psi
Zoloto products in this guide

Bronze Ball Valve (Screwed)
15–100 mm · 9 sizes
₹1,511 to ₹49,378 as on 26 Sep 2026

Bronze Globe Valve (Screwed) — without ISI mark
8–100 mm · 11 sizes
₹1,150 to ₹34,008 as on 26 Sep 2026

Cast Iron Sluice Valve PN 1.6 (Flanged)
50–300 mm · 9 sizes · ISI
₹10,420 to ₹1,08,175 as on 26 Sep 2026

Forged Steel Globe Valve, Class-800 (Standard Bore)
15–50 mm · 6 sizes · IBR
₹2,558 to ₹12,418 as on 26 Sep 2026
Prices are Zoloto's Maximum Retail Prices (MRP) per piece, as printed in the Zoloto price list dated 26 September 2026. Zoloto states that GST at 18% is included in these MRPs. Prices, sizes and availability can change without notice. Call 98490 02060 or email info@maheshvalves.com for today's price and stock before ordering.
Need a price or a quote? Call 98490 02060 or email info@maheshvalves.com.