MRPs from the Zoloto price list dated 26 Sep 2026 · GST included · Call for today's price

How a dual plate check valve works, and what it does about water hammer, with a Zoloto 1082 parts table

Updated 13 Nov 2026 · Reviewed by MTC technical desk

The short answer

A dual plate check valve has two half-discs hinged on a central pin and closed by a spring. The short spring-assisted stroke can reduce slam compared with a swing valve, which is why it is linked with water hammer, though Zoloto's documents make no such claim. Zoloto's 1082 lists nine parts, including the spring, flap, hinge pin and stop pin.

Want prices for these valves? Call 98490 02060 or build a quote list.

How it works (general)

The explanation below is general engineering knowledge, not Zoloto’s wording. Zoloto’s documents we hold give the construction of each valve (the parts table further down) but not a working principle, so we do not attribute this description to Zoloto.

A dual plate check valve, also called a wafer check valve, has two half-circle plates mounted on a hinge pin across the centre of the body. A spring holds the plates against the seat. When flow arrives with enough pressure, it pushes the plates open against the spring, and they fold back like the wings of a butterfly. When the flow stops, the spring closes the plates quickly. This is a general description, and the closing speed of any particular valve depends on its design and on the system.

Step by step

  1. The flow pushes the plates open against the spring.
  2. The plates fold about the hinge pin, with a stop pin to limit their travel.
  3. The liquid passes around the folded plates.
  4. When the flow stops, the spring closes the plates against the body seat. Zoloto’s datasheet lists a body lining.
  5. The valve sits between pipe flanges. Its body has no flanges of its own.

What Zoloto’s datasheet shows for the 1082

The part names and materials below are Zoloto’s own materials-of-construction table for the 1082. The part numbers match the numbered balloons on the drawing on its product page, so you can match each part to the picture.

Materials of construction. Part numbers match the numbered balloons on the drawing.

Materials of construction. Part numbers match the numbered balloons on the drawing.
Part no.Name of partMaterialSpecificationQuantity
1BodyCast IronIS 210 Gr. FG 2001
2Body LiningNitrile RubberIS 5192 – 11
3Flap / DiscStainless Steel / BronzeASTM A 351 Gr. CF8/CF8M / IS 318 Gr. LTB22
4Hinge PinStainless SteelASTM A 276 Type 3041
5Stop PinStainless SteelASTM A 276 Type 3041
6SpringStainless SteelType 304–
7Packing WasherStainless Steel/PTFEASTM A 276 Type 304 / – – ––
8Packing WasherNitrile Rubber / PTFEIS : 5192-1 / – – ––
9Retainer PlugCarbon Steel–2/4

Zoloto valves described in this guide. MRPs are per piece, as on 26 Sep 2026.

Zoloto valves described in this guide
Fig.ProductSizes (mm)MRP per pieceHSN
1082Cast Iron Dual Plate Wafer Type Check Valve, PN 1640–300₹5,424 to ₹53,77184813000
1082ADuctile Iron Dual Plate Wafer Type Check Valve, PN 1640–600₹5,448 to ₹2,65,25884813000
1083Cast Iron Non Return Valve PN 1.0 (Flanged)50–300₹5,665 to ₹62,63984813000

Limits and cautions

The water hammer point is general: a quick-closing, short-stroke valve can reduce the slam that a swing valve makes when the flow reverses, but whether a valve prevents hammer in your system depends on the whole system. Zoloto’s documents we hold do not claim that the 1082 does, and give no closing time. Raise it with your designer. See water hammer causes and the valves that help.

Where to go next

See API 594, the 1083 and 1082 comparison, water hammer and the dual plate glossary entry. At 100 mm the 1082 costs ₹9,737 as on 26 Sep 2026.

What the datasheets say

The lines below are quoted from the Zoloto catalogue for each product, so you can see in Zoloto’s own words what each one is for before you compare prices. Where the catalogue prints nothing, we say so and do not fill the gap.

Zoloto 1082: Cast Iron Dual Plate Wafer Type Check Valve, PN 16
Zoloto says it is suitable for Water. Features printed in the catalogue include: Design standard API 594.; Wafer Type Design, to take lesser space than the conventional Check Valve.; Being light in weight, is more rigid than the standard Swing Type Check Valve, which needs expensive foundation and special supports.; Being cylindrical body, stresses are uniformly distributed.; Much longer seat life because of Bronze / S.S to Rubber contact..
Zoloto 1082A: Ductile Iron Dual Plate Wafer Type Check Valve, PN 16
Zoloto says it is suitable for Water. Features printed in the catalogue include: Design Reference Standard API 594.; Wafer Type Design, to take lesser space than the conventional Check Valve.; Being light in weight, is more rigid than the standard Swing Type Check Valve, which needs expensive foundation and special supports.; Being cylindrical body, stresses are uniformly distributed.; Much longer seat life because of S.S to Rubber contact..
Zoloto 1083: Cast Iron Non Return Valve PN 1.0 (Flanged)
Zoloto says it is suitable for Water. Features printed in the catalogue include: Design Standard IS 5312 – 1.; Flanged Ends to IS 1538.; Seating design – Swing Type.; Bolted Cover.; Renewable Seat with Premium Quality Rubber Flap..

If a feature matters to your job, open the product page and read the full datasheet, including the materials table and the test pressures, and ask us to confirm it with Zoloto in writing.

Ask us for today’s price, and see the extras page for add-ons. For the Zoloto valves at each rating see the pressure class pages.

Questions

How does a dual plate check valve work?

As general engineering knowledge, two half-discs hinged on a central pin are opened by the flow against a spring and closed by the spring when the flow stops.

Does it stop water hammer?

As a general statement it can reduce slam compared with a swing valve, because the plates are light and the spring helps them close. Zoloto's documents we hold make no claim about water hammer.

What parts are in Zoloto's 1082?

Per its materials table: body, body lining, flap or disc, hinge pin, stop pin, spring, packing washers and retainer plug.

Is it flanged?

No. It is a wafer type that fits between flanges.

What standard does it name?

API 594, with PN 16.

Sources

  • Zoloto price list dated 26.09.2026 (pages 2 to 24)
  • Zoloto product catalogue, datasheets for the products named
  • General engineering description of the working principle (not from Zoloto documents)

Zoloto products in this guide

Prices are Zoloto's Maximum Retail Prices (MRP) per piece, as printed in the Zoloto price list dated 26 September 2026. Zoloto states that GST at 18% is included in these MRPs. Prices, sizes and availability can change without notice. Call 98490 02060 or email info@maheshvalves.com for today's price and stock before ordering.

Need a price or a quote? Call 98490 02060 or email info@maheshvalves.com.

Need a price, a quote or stock today?

Call or email Mahesh Trading Corporation, official channel partner of Zoloto Industries. Send us your list of Fig. Nos., sizes and quantities.